[Quality check sheet — August]
Checked by : Production Control Team
Check date : 2026-08-07
Scope      : week 1 Aug deliveries

No  Check item                       Standard        Result   Notes
-------------------------------------------------------------------------
01  Profile cut-face squareness      ±0.5mm          Pass
02  Surface anodizing thickness      10μm or more    Pass
03  Connector fastening torque       12N·m           Pass
04  Anti-vibration pad hardness      Shore A 60      Fail     3 lots retest
05  Bolt tensile strength            Grade 8.8       Pass
06  Tape insulation resistance       100MΩ or more   Pass
07  Tray paint adhesion              Class 1         Pass
08  End cap fit clearance            0.2mm or less   Hold     jig being recalibrated
------------------------------------------------------------------------

Verdict : conditional pass
- The 3 failed lots of item 04 are held at receiving; a retest was requested.
- Item 08 will be measured again on 12 August after the jig is recalibrated.
- The other 6 items met the standard.

Next check : 2026-08-14
